VDO Cyclecomputing Z1 Instructions d'exploitation télécharger pdf (Page 45)

Recording

Press the ASSIGN button assigned to the

index function.

When pressed during recording

appears for about 7 seconds and an index

signal is recorded.

When pressed in the standby mode

flashes.

After you press REC START/STOP to start

recording, appears for about 7 seconds and

an index signal is recorded.

To cancel the operation

Before starting to record, press the ASSIGN

button assigned to the index function again.

b Note

• You cannot record an index signal on a recorded tape

afterward.

Recording on a device

connected via an

i.LINK cable –

External REC Control

By connecting the camcorder to an HDV/

DVCAM/DV compatible device (digital HD

video camera recorder, digital video camera

recorder, hard disc recorder, etc.) with an

i.LINK cable, recording can be performed on

this camcorder and on the connected device

simultaneously, or relayed from the

camcorder to the connected device when the

tape in the camcorder comes nearly to the

end.

Refer also to the instruction manuals supplied

with the devices to be connected.

1 Connect the camcorder and the device

using an i.LINK cable (p. 89).

2 Set the POWER switch to CAMERA.

3 Press MENU.

,continued

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 135 136

Pas de commentaire

VDO Cyclecomputing Z1 Instructions d'exploitation Page 45